# Auto configuration bypass (Say NO to use this file) ################################################## DIRECT_SETTINGS_ONLY=NO ################################################## # Default Settings ################################################## VERBOSE=YES MAX_LOOP=2 # Turn on Forwarding IP Feature IPFWDING_KERNEL=YES IPFWDING_FW=YES # Set a hostname (found below). The name is set # further down. CONFIG_HOSTNAME=YES # Set a /etc/hosts file - you can set # individual entries further down, but for most of # us we don't need to use it. CONFIG_HOSTSFILE=NO # Setup /etc/resolv.conf - you can set # individual entries further down. This would only # be needed if you are doing any name and IP # address comparisons before you let someone # into your network. i.e.: ALL: PARANOID in # /etc/hosts.allow. CONFIG_DNS=NO ################################################## # Interfaces ################################################## # connection towards the local LAN IF0_IFNAME=eth0 IF0_IPADDR=192.168.0.1 IF0_NETMASK=255.255.255.0 IF0_BROADCAST=192.168.0.255 # Protect against spoofed IP addresses. This helps # prevent someone from trying to sneak through our # security by making them appear to have an IP # address they are not assigned to use. Examples # include someone trying to break in using one of # your Internal IP addresses when they are in fact # coming from the Internet. IF0_IP_SPOOF=YES # connection towards the Internet (using our # sample IP addresses from Figure 1) IF1_IFNAME=eth1 IF1_IPADDR=193.181.132.24 IF1_NETMASK=255.255.255.0 IF1_BROADCAST=193.181.132.255 # Protect against spoofed IP addresses IF1_IP_SPOOF=YES ################################################## # Hosts ################################################## # This is not needed in our example ################################################## # Networks ################################################## # local Network Config. NET0_NETADDR=192.168.0.0 NET0_NETMASK=$IF0_NETMASK NET0_GATEWAY_IF=default NET0_GATEWAY_IP=default # Masquerade our internal local IP addresses NET0_IPMASQ=YES NET0_IPMASQ_IF=default # Internet Network config (again using the sample # information in Figure 1) NET1_NETADDR=193.181.132.0 NET1_NETMASK=$IF1_NETMASK NET1_GATEWAY_IF=default NET1_GATEWAY_IP=default # Don't masquerade external Internet IP # addresses NET1_IPMASQ=NO NET1_IPMASQ_IF=default ################################################## # Gateways (Default Routes) ################################################## # Internet Gateway config (again using the sample # information in Figure 1) GW0_IPADDR=193.181.132.1 GW0_IFNAME=$IF0_NAME GW0_METRIC=0 ################################################## # Hostname Requires: CONFIG_HOSTNAME=YES ################################################## HOSTNAME=myrouter ################################################## # Hosts file (Static domainname entires # Requires: CONFIG_HOSTSFILE=YES # This is used if CONFIG_HOSTSFILE=YES set above. ################################################## # IP FQDN hostname alias1 alias2.. #HOSTS0="$IF0_IPADDR $HOSTNAME.somewhere.net $HOSTNAME mr rtr" #HOSTS1="192.168.1.22 host2.somewhere.net host2 h2" ################################################## # Domain Search Order and Name Servers # Requires: CONFIG_DNS=YES # This is set if you set CONFIG_DNS=YES above. ################################################## #DOMAINS="somewhere.net domain2.net" #DNS0=192.168.1.1 #DNS1=192.168.1.2 ################################################## # Brief instructions for this file ################################################## # DIRECT_SETTINGS_ONLY=(YES/NO) Default: YES # Bypass automatic configuration using this file's # settings, and only execute the commands in # /etc/network_direct.conf # VERBOSE=(YES/NO) Default: Yes # Be verbose about settings. # # MAX_LOOP=(int) Default: 10 # Maximum number of incrementable entries to search<\n> # for. IE: If you create a DNS7=, and MAX_LOOP=7, # it will not be reached. # (DNS0 - DNS7 == 8 entires) # Setting this value too high will decrease the # speed of the configuration system. # # IPFWDING_KERNEL=(YES/NO) Default: NO # Enable IP forwarding in the kernel. # # IPFWDING_FW=(YES/NO) Default: NO # (requires ipfwadm) # Set firewall forwarding policy to 'allow'. # # CONFIG_HOSTNAME=(YES/NO) Default: NO # Create /etc/hostname file using HOSTNAME entry. # Any current hostname file will be *OVERWRITTEN* # # CONFIG_HOSTSFILE=(YES/NO) Default: NO # Create /etc/hosts file using HOSTSx entries. # Any current hosts file will be **OVERWRITTEN** # # CONFIG_DNS=(YES/NO) Default: NO # Create /etc/resolv.conf file using DOMAINS and # DNSx entries. # Any current resolv.conf file will be **OVERWRITTEN** # ################################################## #END