## apcupsd.conf v1.1 ##<\n> # # ========= General configuration parameters ======== # # defines the type of cable that you have. UPSCABLE smart # # defines the type of UPS you have. UPSTYPE smartups # # name of your serial port DEVICE /dev/ttyS0 # # path for serial port lock file LOCKFILE /var/lock # # === configuration parameters used during power # failures ========== # # If during a power failure, the remaining battery # percentage (as reported by the UPS) is below or # equal to BATTERYLEVEL, # apcupsd will initiate a system shutdown. BATTERYLEVEL 5 # # # If during a power failure, the remaining runtime # in minutes (as calculated internally by the UPS) # is below or equal to MINUTES, # apcupsd, will initiate a system shutdown. MINUTES 3 # # # If during a power failure, the UPS has run on # batteries for TIMEOUT many seconds or longer, # apcupsd will initiate a system shutdown. # A value of 0 disables this timer. TIMEOUT 0 # # # Time in seconds between annoying users to # signoff prior to system shutdown. 0 disables. ANNOY 300 # # Initial delay after power failure before warning # users to get off the system. ANNOYDELAY 60 # # The condition which determines when users are # prevented from # logging in during a power failure. NOLOGON disable # # ==== Configuration statements the network # information server ========= # # information server. If netstatus is on, a network # information server process will be started for # serving the STATUS and EVENT data over the network # (used by CGI programs). NETSERVER on # # port to use for sending STATUS and EVENTS data # over the network. It is not used unless NETSERVER # is on. If you change this port, # you will need to change the corresponding value # in the cgi directory and rebuild the cgi programs. SERVERPORT 7000 # # If you want the last few EVENTS to be available # over the network by the network information server, # you must define an EVENTSFILE. # Only the last 50 or so events are kept. EVENTSFILE /etc/apcupsd/apcupsd.events # # ===== Configuration statements to control apcupsd # system logging ======== # # Time interval in seconds between writing the # STATUS file; 0 disables STATTIME 60 # # Location of STATUS file # (written to only if STATTIME is non-zero) STATFILE /etc/apcupsd/apcupsd.status # # You probably do not want this on. LOGSTATS off # # Time interval in seconds between writing # the DATA records to # the log file. 0 disables. DATATIME 0 # # ====== Configuration statements used if sharing === # a UPS and controlling it via the network # # normally standalone unless you share a UPS with # multiple machines. UPSCLASS netmaster # # Unless you want to share the UPS # (power multiple machines). # this should be disable UPSMODE net # # NETACCESS <string> [ true | false ] # Enable Network Access Support NETACCESS true # # NETTIME <int> NETTIME 60 # # NETPORT <int> NETPORT 6666 # # SLAVE <string> SLAVE my.network.slave.com # # USERMAGIC <string> USERMAGIC some_unique_string